產品型號及含義

Product model and meaning

規格尺寸

Specification and size

高度H（mm）× 寬度W（mm）× 深度D（mm）

2300       650      1500（1600）

2300       800      1500（1600）

2300       1000     1500（1600）

用途及性能

KYN28A-12型戶內金屬鎧裝移開式開關設備系3.6~12KV三相交流50HZ單母線及分段系統的成套配電裝置。適合用于三相交流額定電壓至12KV，額定工作頻率50HZ電力系統，用于接受和分配電能并對電路實行控制、保護及監測。

符合國家標準：GB3906-2006《3~35KV交流金屬封閉開關設備》

GB11022-2011《高壓開關設備通用技術條件》

IEC298(1990)《額定電壓1KV以上及52KV以下交流金屬封閉開關設備和控制設備》

DL/T404-2007《戶內交流高壓開關柜訂貨技術條件》

Application and performance

KYN28A-12 indoor metal armored removable switchgear is a complete set of power distribution equipment for 3.6~12KV three-phase AC 50HZ single bus and segment system. Suitable for three-phase AC rated voltage up to 12KV, rated operating frequency 50HZ power system, used to receive and distribute electric energy and control, protect and monitor the circuit.

Meet the national standard: GB3906-2006 "3~35KV AC metal enclosed switchgear"

GB11022-2011 "High voltage Switchgear general technical Conditions"

IEC298(1990) "AC metal-enclosed switchgear and control equipment with rated voltage above 1KV and below 52KV"

DL/T404-2007 "Indoor AC High Voltage Switch cabinet ordering Technical Conditions"

結構特點

A、外殼采用進口敷鋁鋅鋼板，經CNC機床加工，并采取多重折邊工藝。柜體采用組裝式結構，用拉鉚螺母和高強度螺栓聯接而成。這樣使加工生產周期短、零部件通用性強、占地面積少，便于組織生產。

B、產品由主母線室、斷路器室、電纜室、繼電器室等組成，水平母線采用TMY系列鍍錫銅排，采用高強度母線支柱絕緣子及母線套管固定在柜體后上部。垂直母線采用高強度母線，支柱絕緣子固定母排。

C、手車骨架也采用敷鉛鋅鋼板，經CNC機床加工后組裝而成，手車與柜體絕緣配合，機械連鎖安全、可靠、靈活。根據用途不同手車分?jǐn)嗦菲魇周?chē)、電壓互感器手車、計量手車、隔離手車。

Structural characteristics

A. The shell is made of imported aluminum zinc steel plate, processed by CNC machine tool, and adopts multiple hemming process. The cabinet body is of assembled structure and connected with riveted nuts and high-strength bolts. In this way, the processing and production cycle is short, the parts are versatile, the floor area is small, and the production is easy to organize.

B. The product is composed of main busbar room, circuit breaker room, cable room, relay room, etc. The horizontal busbar adopts TMY series tinned copper bar, and adopts high-strength busbar pillar insulators and busbar bushing to fix the upper part of the back of the cabinet. The vertical busbar adopts high strength busbar, and the pillar insulator fixes the busbar.

C. The frame of the handcart is also made of lead-zinc steel plate, which is assembled by CNC machine tool processing. The handcart is insulated with the cabinet body, and the mechanical chain is safe, reliable and flexible. According to the use of different handcars, circuit breaker handcars, voltage transformer handcars, measuring handcars, isolation handcars.